Volkswagen Polo Owners Manual: Lights and vision
- Lights
- Introduction
- Indicator lamps
- Turn signal and main beam lever
- Switching lights on and off
- Lights and vision – functions
- Masking or switching over headlights for driving abroad (travel mode)
- Headlight range control, instrument and switch lighting
- Interior and reading lights
- Protection from the sun
- Windscreen wiper and washer
- Introduction
- Indicator lamp
- Windscreen wiper lever
- Windscreen wiper functions
- Service position for the front windscreen wipers
- Rain/light sensor
- Checking and refilling the windscreen washer fluid level
- Mirrors
Securing child seats with the top tether
Fig. 65 Retaining ring for top tether
in the stowage area behind the rear seats
Fig. 66 Top tether hooked over into the
luggage compartment
First read and observe the introductory information ...
Lights
...
Other materials:
Checklist
In some countries, special safety standards and emissions-related
legislation apply that may differ form the construction of the vehicle, Volkswagen
recommends that you visit your Volkswagen dealership before travelling abroad
to find out about any legal requirements and the following is ...
Coolant specification
First read and observe the introductory information
and safety warningsThe cooling system is filled at the factory with a mixture
of specially prepared water and at least 40% coolant additive G 13
(TL-VW 774 J). The coolant additive is dyed purple. This mixture of water and coolant
additive ...
4-Pin Heated Oxygen Sensor (HO2S), Removing and Installing
Note
Do not repair the heated oxygen sensor wires. Repairing may
result in malfunctions.
Use the faulty sensor as a guide for installing all of the
accompanying attachments, cable ties or marking bands.
...
