Volkswagen Polo Owners Manual: Interior and reading lights
First read and observe the introductory information
and safety warnings
| Button or position | Function |
|---|---|
 |
Switches off the interior lights. |
 |
Switches on the interior lights. |
 |
Switches door contact switch on (central position). |
| The interior lights are switched on automatically when the vehicle is unlocked, a door is opened or the vehicle key is removed from the ignition. | |
| The light extinguishes a few seconds after all doors are closed, when the vehicle is locked or the ignition is switched on. | |
 |
Switching the individual reading lights on or off. |
Luggage compartment light
A light will be switched on or off automatically when the tailgate is opened or closed.
The interior lighting and reading lights switch off when the vehicle is locked or after a delay of a few minutes when the vehicle key is removed from the ignition lock. This prevents the battery from discharging.
Headlight range control, instrument and switch lighting
Fig. 69 Next to the steering wheel: control
for instrument and switch lighting ① and headlight range control ②
First read and observe the introductory information
and safety warnings
① In ...
Other materials:
An economic driving style
First read and observe the introductory information
and safety warnings Changing gear earlier
In principle, the highest gear is always the most economical gear. A rule of
thumb for most vehicles: at a speed of 30 km/h (19 mph) drive in 3rd gear, at 40
km/h (25 mph) in 4th gear and at 50 km/ ...
Vibration, Road Test, Performing Before Balancing
If a vehicle comes to the workshop with the complaint
“vibration”, a road test must be performed before balancing the
wheels.
That way, information about the type of vibration can be
obtained.
Obser ...
Trailer Socket
Connect the trailer socket to the vehicle electrical system
of the vehicle pulling the trailer according to the manufacturer
instructions.
Refer to the applicable wiring diagrams or manufacturer
installation instructions when installing ...
