Volkswagen Polo Service & Repair Manual: General Paint Information
- Safety Precautions
- General Information
- Factory Paint Paint Structure
- Customer Service Paint Paint Structure
- Repair Instructions for the Underbody and Stone Chip Protection
- Adhesive Surface Pretreatment when Replacing Laser-Soldered Roofs
- Fender Corrosion Repair Measures, in Wheel Housing Liner Contact Area
- Fold Corrosion Servicing Notes
- Corrosion Protection for Body, Attached and Welded Parts
- Parking Aid Sensor, Painting
- ACC - Adaptive Cruise Control
- Original Products
- General Application Instructions for Repair and Painting Systems
- Filling Paste
- Primer Metal
- Plastic Primer
- Filler
- Top Coats
- Clear Coats
- Hardener
- Thinners
- Preservation
- Underbody Protection
- Stone Chip Protection
- Wax Underbody Protection
- Sealing Materials
- Cleaning Agent
- SprayMax System
- Additional Materials
- Workshop Equipment
- Special Tools
Safety Precautions
Safety Precautions when Painting Vehicles with Electric Drive
Caution
Risk of damaging the battery cells at too high of
d ...
Other materials:
Wiring Eyelets, Repairing
Special tools and workshop equipment
required
Torque Wrench 1331 5-50Nm -VAG1331-
Note
Do not use rust remover, contact spray or grease because the
lack of friction will cause the torque to be ...
Other stowage compartments
Fig. 101 In the roof: coat hooks
First read and observe the introductory information
and safety warnings
Coat hooks in the roof
Coat hooks are located on the central door pillar and on the rear grab handles
in the roof (arrows).
Other stowage areas:
In the rear door trims.
In the ...
Wheel, Balancing on Stationary Balancing Machine
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
