Volkswagen Polo Service & Repair Manual: Rim Information
- Overview - Rim
- Identification
- Composite Wheels
- Light Alloy Wheels, Care and Maintenance
- Light Alloy Wheels, Preparing
- Hub Cap for Alloy Wheels with Open Threaded Connection, Removing and Installing
- Decorative Trims, Replacing
- Valve, Removing and Installing
- Run-Flat System PAX
Increasing Temperature Due To Low Tire Pressure
The diagram shows the temperature behavior of a tire at
speed of 180 km/h (111.84 mph).
A -
Normal range: when maintaining the specif ...
Overview - Rim
1 -
Rim Flange
Stop for the side tire bead
2 -
Hump (H2) on Both Bead Seats
Prevents the tire from slipping off ...
Other materials:
Introduction
This chapter contains information on the following subjects:
→ Contents of the breakdown set
→ Preparation
→ Sealing and inflating tyres
→ Test after driving for 10 minutes
You can use the breakdown set (tyre mobility set) to safely seal any tyre
damage cau ...
Tire Sealant, Removing
Place the wheel on a flat surface.
–
Remove the valve insert.
Caution
Tire sealant is harmful to health.
eye and skin irritation as well ...
Evaporator Vent Temperature Sensor -G263- or Evaporator Temperature Sensor
-G308
Function:
The Evaporator Vent Temperature Sensor -G263- or Evaporator
Temperature Sensor -G308- determines the temperature behind the
evaporator. This value goes to the air conditioning control
module and serves as a reference signal for ...
