Volkswagen Polo Service & Repair Manual: 7-Pin« Trailer Socket
| If more electrical consumers need to be connected than the
»7-pin« socket allows, a second
»7-pin« socket must be installed.
Pin assignment must conform to DIN ISO 1724: |
| 5 - Right headlamps, side marker lamps and license plate
lamp |
| 7 - Left headlamps, side marker lamps and license plate lamp |
|
|
|
Connect the trailer socket to the vehicle electrical system
of the vehicle pulling the trailer according to the manufacturer
instructions.
Refe ...
The backup lamps, »continuous current«
and charging cable can be used on the trailer with the
»13-pin« trailer socket. A
»13-pin« trailer socket is
re ...
Other materials:
Flushing Not Necessary
Note
For vehicles with an electrically-driven A/C compressor,
de-energize the high voltage system before removing the A/C
compressor. Refer to
→ Electrical System Hybrid; Rep. Gr.93.
–
Dischar ...
Hitching and connecting the trailer
First read and observe the introductory information
and safety warnings
Emergency breakaway cable
Always fasten the trailer's emergency breakaway cable properly to the towing
vehicle. Leave enough slack in the emergency breakaway cable so that the vehicle
can still drive around corners. How ...
Introduction
This chapter contains information on the following subjects:
→ Stowage
→ Contents
Observe any country-specific legislation when securing your vehicle in the
event of a breakdown.
Additional information and warnings:
Preparation for working in the engine compartment
...
© 2016-2026 Copyright www.vwpolo.net
Trailer Socket
13-Pin« Trailer Socket