Special ToolsTaper
Taper is caused by slightly offsetting the tread and/or the
belt by a few tenths of a millimeter from the geometric center
of the tire. Taper cannot be recognized visually nor can it be
measured with workshop equipment.
...
A/C Pressure Switch -F129
Note
For switching pressures, removing and installing switches
and switch arrangement and version, see vehicle-specific
refrigerant circuit.
Refer to
→ Rep. Gr.87.
...
Two-Part Clear Coat
Definition:
Two-Part Clear Coat -LLS MAX 210-
Edition 12/2010
Product Description
The Two-Part Clear Coat - LLS MAX 210- is a high-gloss
two-component clear coat for long-las ...