VW Polo manuals

Volkswagen Polo Service & Repair Manual: Joint-Free Wiper Blade Characteristics

Characteristics for Bosch and Federal Mogul
Check the manufacturer when replacing the wiper blades. Always replace them with blades made by the same manufacturer.
The wiper blades can be identified by the wiper arm mount.
   
Bosch Wiper Blades -1 and 2-
 

Joint-Free Wiper Blade Characteristics

Federal Mogul Wiper Blades -1-
 

Joint-Free Wiper Blade Characteristics

Special Tools

Special tools and workshop equipment required
Hot Air Blower -VAG1416-
Heat Gun -VAS1978/14-
   
Hot Air Blower -VAS5179-
 

Special Tools

Corrugated Tube, Repairing
Special tools and workshop equipment required Hot Air Blower -VAS5179- or Hot Air Blower -VAG1416/- or ...

Exterior Lights, Switches
HID Headlamp Usage and Safety Precautions Special tools and workshop equipment required Protective Eyewear Glove ...

Other materials:

Refrigerant Circuit, Converting R12 to R134a and Servicing
  Note The laws and regulations listed below are applicable in Germany. Different or additional laws and regulations may apply in other countries. Addresses in other countries can be obtained from the relevant au ...

Correct sitting position
Fig. 35 There must be a distance Ⓐ of at least 25 cm between the driver and the steering wheel. Fig. 36 Correct seat belt routing and head restraint adjustment First read and observe the introductory information and safety warnings The following details the correct sitting positions for ...

Wheel, Balancing, Tire and Wheel Radial and Lateral Run-Out, Checking
Before beginning balancing, the following requirements must be fulfilled. The tire pressure must be OK. The tire profile must not be worn on one side. The tire profile must be at least 4 mm. ...

© 2016-2026 Copyright www.vwpolo.net