Siemens Wheel Electronics Tire Pressure Monitoring Sensor, Removing and
Installing
WARNING
If tire sealant was used, then the wheel electronics
on that particular wheel must be replaced.
The Siemens wheel electronics does not have a
microencapsulated ...
AGM Battery, Checking
Perform Battery Checks in the Following Sequence:
1.
Visual inspection. Refer to
→ Chapter „Visual Inspection“.
2.
Check the battery using the Battery Tester -VAS6161-. Refer
to
...
Support Mode with Battery Charger -VAS5095A
General Information
The support mode provides the vehicle electrical system with
voltage when the battery is removed or disconnected.
For more information. Refer to Battery Charger -VAS5095A-
Operating Instructions.
...