Taper
Taper is caused by slightly offsetting the tread and/or the
belt by a few tenths of a millimeter from the geometric center
of the tire. Taper cannot be recognized visually nor can it be
measured with workshop equipment.
...
Explanation of Test Results
1 -
Type of test.
2 -
Battery test result.
3 -
Measured voltage
4 -
Measured cold start value.
5 -
Cold st ...
Sealing and inflating tyres
First read and observe the introductory
information and safety warnings
Sealing a tyre
Unscrew the cap from the tyre valve.
Use the valve core extractor to screw the valve core out of the tyre
valve. Place the core on a clean surface.
Shake the tyre filler bottle vigorously up ...