Siemens Wheel Electronics Tire Pressure Monitoring Sensor, Removing and
Installing
Tire Sealant, Expiration DateWheel, Balancing on Stationary Balancing Machine
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
Run-Flat System PAX, Examining Support Ring
As with the tire, the supporting ring is generally not
replaced after driving with flat tire.
Replace the support ring if the following damages have
occurred:
Blowouts or mis ...
Tire Pressure Sensor and Metal Valve, Removing and Installing
Special tools and workshop equipment
required
Torque Wrench 1410 -VAG1410- and Torque Wrench 1331 5-50Nm
-VAG1331-
–
Place metal valve with rubber seal through rim from inside.
...