Refrigerant Circuit, General PrecautionsWheel, Balancing on Stationary Balancing Machine
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
Special Tools
Special tools and workshop equipment required
Wheel Bolt Master Socket Set -T10101-
Wheel Bolt Master Socket Set -T10101A-
Wheel Bolt ...
Corrective Action When Vehicle Pulls to One Side
Test Conditions Before and During the Road Test
–
Check all suspension components on front and rear axle for
damage.
–
Check tire pressure and correct if necessary.
– ...