Volkswagen Polo Service & Repair Manual: HS Spot Thinner

Volkswagen Polo Service & Repair Manual / General Paint Information / Original Products / Thinners / HS Spot Thinner

Definition:

HS Spot Thinner -LVM 006 000 A2-

Edition 06/2013

Product Description

HS Spot Thinner -LVM 006 000 A2- is a special drying accelerator for minor repairs in certain Two-Part HS Clear Coats and Two-Part HS Top Coats. The clear coat and top coat remain VOC compliant at the specified mixture.

Use:

Clever repair area of application

Only for small surfaces

Do not apply to horizontal surfaces

Application Instructions

Base Surface

See the technical application instructions for the respective base component

Suitable preliminary coatings:

Two-Part HS Brilliant Plus Clear Coat -LZK 769 K05 A5-

HS Vario Clear Coat -L2K 769 K01 A5-

Two-Part HS Performance Clear Coat -LZK 769 K06 A5-

Two-Part HS Optimum Plus Clear Coat -LZK 769 K07 A5-

Two-Part HS Solid Top Coat -L2K 073 ... ..-

Two-Part HS Mixed Paint -L2K 074 ... ..-

Processing

Mixture ratio:

–	3:1 by volume with:

Two-Part VHS Hardener -LHA 009 051 A2-/-LVM 009 051 A5-

Two-Part VHS Hardener, Short -LHA 009 050 A2-

Dilutable with:

HS Spot Thinner -LVM 006 000 A2- (HS spot thinner is added instead of Two-Part Thinner, Special -LVM 009 200 A2-/-LVM 009 200 A5-)

+5 % for Two-Part HS Brilliant Plus Clear Coat -LZK 769 K05 A5-

+ 12.5 % for HS Vario Clear Coat -L2K 769 K01 A5-

+5 % for Two-Part HS Performance Clear Coat -LZK 769 K06 A5-

+ 10 % for Two-Part HS Optimum Plus Clear Coat -LZK 769 K07 A5-

+12,5 % bei Two-Part HS Solid Top Coat -L2K 073 ... ..-/Two-Part HS Mixed Paint -L2K 074 ... ..-

HS Spot Thinner

Processing time/pot life:

–	Ready to spray in 35 to 45 minutes at +20 °C (68 °F) (clear coat with Two-Part VHS Hardener -LHA 009 051 A2-/-LVM 009 051 A5-)

–	Ready to spray in 50 to 60 minutes at +20 °C (68 °F) (clear coat with Two-Part HS Solid Top Coat -L2K 073 ... ..-/Two-Part HS Mixed Paint -L2K 074 ... ..-)

Application:

–	For the application of the clear coat and the two-part HS mixed/top coat, refer to the respective technical application information.

Note

Technological disadvantages can occur with large surface applications and horizontal surfaces (the hood, for example).

A “short” hardening system is preferred when using inside the clever repair system.

HS Spot Thinner

Personal Protective Equipment:

Note the safety data sheets

Wear the personal protective equipment during application

Characteristics

HS Spot Thinner

Flashpoint:

+21 °C (69.8 °F)

Storage

The HS spot thinner has a guaranteed shelf life of 24 months from date of manufacture. Use no later than the date indicated on the label and store in original container at +20 °C (68 °F).

HS Spot Thinner

Purified Water

Definition:

Aquaplus Purified Water -LVW 010 000 A5-

Note

The technical application information for this product is not required.

Two-Part Thinner

Definition: Two-Part Thinner -LVE 009 001 A5- Two-Part Thinner, Long -LVM 009 300 A2- Two-P ...

Preservation

...

Other materials:

Underseal
First read and observe the introductory information and safety warningsThe underside of the vehicle is coated to protect it from corrosion and damage. The protective coating on the underside of the vehicle could be damaged when driving. Volkswagen therefore recommends that the protective coati ...

Contaminants Removed from Refrigerant Circuit
The reservoir/receiver/dryer or dryer bag/cartridge should not be replaced under the following conditions. After an accident when there is no damage on the reservoir/receiver/dryer. The repair was done quickl ...

Gloss Level Adjustment of HS Clear Lacquer and HS Top Coat
Edition 04/2013 Adjusting of varying gloss grades of HS clear lacquer and HS top coat by mixing Matting Component -LVM 769 810 A2- for plastic and metal surfaces The reference material that addresses the factors that ...