Pressure Relief Valve
Refrigerant Circuit with Expansion Valve and EvaporatorAdapter for Assembling Flushing Circuit
The following table lists the different adapters necessary
to connect the service station to the refrigerant circuit, to
flush and to bypass the removed receiver/dryer or reservoir and
expansion valve (depending on the vehicle).
Us ...
Support Mode with Battery Charger -VAS5903
General Information
The support mode provides the vehicle electrical system with
voltage when the battery is removed or disconnected.
For more information. Refer to Battery Charger -VAS5903-
Operating Instructions.
...
Single Wire Seals, Installing
Note
Single wire seals prevent the penetration of water and dirt
into the contact housing. They are installed, for example, in
the engine compartment and must be reinstalled after a repair.
Single wire seal is crimpe ...