Volkswagen Polo Owners Manual: Introduction
This chapter contains information on the following subjects:
→ Warning and indicator lamps
→ Information on steering
Additional information and warnings:
- Starting and stopping the engine
- Battery
- Tow-starting and towing
WARNING
- The power steering only functions when the engine is running.
- Never allow the vehicle to roll if the engine is switched off.
- Never remove the vehicle key from the ignition lock when the vehicle is in motion. The steering lock may be activated and you will no longer be able to steer the vehicle.
Steering
...
Warning and indicator lamps
First read and observe the introductory information
and safety warnings Depending ont eh vehicle equipment scope,
an electrohydraulic or an electromechanic steering system may be fitted.
...
Other materials:
Changing a blown fuse
Fig. 174 A blown fuse
Fig. 175 Removing or fitting a
fuse using the plastic pliers ①
First read and observe the introductory
information and safety warnings
Preparation
Switch off the ignition, the lights and all electrical consumers.
Open the appropriate fuse box .
Detecti ...
Evacuating and Charging Valve, Low Pressure Side
Special tools and workshop equipment
required
Torque Wrench 1783 - 2-10Nm -VAG1783- with Torque Wrench
1783 - 1/4" Drive Ratchet -VAS6234-
WARNING
There is a dan ...
Evaporator Vent Temperature Sensor -G263- or Evaporator Temperature Sensor
-G308
Function:
The Evaporator Vent Temperature Sensor -G263- or Evaporator
Temperature Sensor -G308- determines the temperature behind the
evaporator. This value goes to the air conditioning control
module and serves as a reference signal for ...
