Applications (apps)
IntroductionTaper
Taper is caused by slightly offsetting the tread and/or the
belt by a few tenths of a millimeter from the geometric center
of the tire. Taper cannot be recognized visually nor can it be
measured with workshop equipment.
...
Wheel, Balancing, Tire and Wheel Radial and Lateral Run-Out, Checking
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
Wiring Harness Repair Set - Wire Strippers -VAS1978/3
The Wiring Harness Repair Set - Wire Strippers -VAS1978/3-
is used for professional stripping and cutting of wires.
The Wiring Harness Repair Set - Wire Strippers -VAS1978/3-
is a component of the Wiring Harness Repair Set -VAS1978B- and
...