Two-Part HS Wet-in-Wet Filler
Two-Part HS Top CoatOverview - Tire Pressure Monitoring Sensor without Valve
1 -
Valve Cap
2 -
Nut
Individual component of -item 7-
→ Item
Tightening specification. Refer to
→ Anchor.
Always replace if removed
3 -
W ...
Corrective Action When Vehicle Pulls to One Side
Test Conditions Before and During the Road Test
–
Check all suspension components on front and rear axle for
damage.
–
Check tire pressure and correct if necessary.
– ...
Run-Flat System PAX, Examining Support Ring
As with the tire, the supporting ring is generally not
replaced after driving with flat tire.
Replace the support ring if the following damages have
occurred:
Blowouts or mis ...