Battery Charger -VAS5900- Maintenance Charging
Battery Charger -VAS5903- Device DescriptionAdhesive Surface Pretreatment when Replacing Laser-Soldered Roofs
Dry sand the cataphoretic primer on the roof adhesive surface
-item 6-
→ Item down to the bare metal using P180 sandpaper.
–
Dry sand the roof pillar adhesive surface
...
Vehicle lifting points
Fig. 150 Lifting points at front for the
lifting platform or vehicle jack
Fig. 151 Lifting points at rear for the
lifting platform or vehicle jack
First read and observe the introductory information
and safety warningsThe vehicle may only be lifted at the points shown in
the illustration ...
Wheel, Balancing, Tire and Wheel Radial and Lateral Run-Out, Checking
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...