Volkswagen Polo Service & Repair Manual: A/C Compressor, Replacing

Refrigerant Still in Circuit

Discharge the refrigerant circuit. –  Remove malfunctioning component, flush with compressed air, collect escaping refrigerant oil. ...

Flushing Not Necessary

  Note For vehicles with an electrically-driven A/C compressor, de-energize the high voltage system before removing the A/C compressor. Refer to &# ...

Other materials:

Wheel, Balancing on Stationary Balancing Machine
Before beginning balancing, the following requirements must be fulfilled. The tire pressure must be OK. The tire profile must not be worn on one side. The tire profile must be at least 4 mm. ...

After changing a wheel
First read and observe the introductory information and safety warnings Clean the tools as necessary and place them back in the toolbox in the luggage compartment . Stow the spare wheel, temporary spare wheel or the removed wheel safely in the luggage compartment. The tight ...

Evacuating and Charging Valve, Low Pressure Side
Special tools and workshop equipment required Torque Wrench 1783 - 2-10Nm -VAG1783- with Torque Wrench 1783 - 1/4" Drive Ratchet -VAS6234-   WARNING There is a dan ...