Volkswagen Polo Owners Manual: Volkswagen information system
- Introduction
- Overview of the menu structure
- Using the menus in the instrument cluster
- Main menu
- MFD (multifunction display) menu
- Settings menu
Service interval display
First read and observe the introductory
information and safety warnings
The service display is shown on the instrument cluster or .
Service schedules at Volkswagen are divided into two categories ...
Introduction
With the ignition switched on, the different display functions can be
accessed via the menus.
There are no buttons on the windscreen wiper lever in vehicles equipped with
a multifunction steerin ...
Other materials:
Checklist
Carry out the steps in the specified order :
With the engine at operating temperature,
park the vehicle on a level surface to ensure that the engine oil reading is
correct.
Switch off the engine and wait a few minutes
for the engine oil to flow back into the sump.
Open the ...
Warning and indicator lamp
First read and observe the introductory information
and safety warnings
Lit up
Possible cause
Solution
Dual clutch gearbox DSG® overheated.
Do not drive on!
Move the selector lever to position P and leave the gearbox
...
Contact Release Tools
Various release tools are used to remove the different
terminals from terminal housings without damage.
A selection of release tools are a component of the Wiring
Harness Repair Set -VAS1978- and the Wiring Harness Repair Set
-VAS1978A-. ...
