Volkswagen Polo Service & Repair Manual: Paint Thickness Test -VAS5278

Volkswagen Polo Service & Repair Manual / General Paint Information / Workshop Equipment / Tools / Paint Thickness Test -VAS5278

Definition:

Paint Thickness Test -VAS5278-

Product Description

The paint thickness test allows for exact and interference-free layer thickness measuring of paint coats on steel, iron or non-ferrous metals. The electronic instrument with digital LCD display shows the measurement via a menu.

Technical Data

Progressive measuring range: 0-5000 µm or 0-200 mils

Base tolerance: ± 1 µm or ± 0.06 mils

Temperature range: 0 °C - 60 °C (32° - 140°F)

Power supply: 9 volt block

4-digit liquid crystal display (LCD)

Delivery Contents

1 measuring instrument for steel/iron

1 measuring instrument for non-magnetic metals

1 service bag

2 zero test plates

Operating instructions

Paint Thickness Tester -VAS6197

Definition: Paint Thickness Tester -VAS6197- Product Description Fully-electronic layer thickness measu ...

Stone Chip Tester -VAS5102A

Definition: Stone Chip Tester -VAS5102A- Product Description The Stone Chip Tester -VAS5102A- is a prop ...

Other materials:

Fender Corrosion Repair Measures, in Wheel Housing Liner Contact Area
Note The corrosion protection in the fender seam must be applied on all replacement parts, on which the attached seal is not already present. The additional corrosion protection seal will prevent “chafe marks” in the fender wheel housing liner. ...

Wire Break with Dual Repair Point
Repair point with intermediate wire section – Free up wire intended for repair at two points (approximately 20 cm to both sides of respective repair points). – If required, remove wiring harness wra ...

Introduction
This chapter contains information on the following subjects: → Ignition lock → Starting the engine → Stopping the engine → Electronic immobilizer Notes in this chapter concerning the automatic gearbox are applicable both for the automatic gearbo ...