Volkswagen Polo Owners Manual: Luggage compartment cover

Volkswagen Polo Owners Manual / Transporting items / Luggage compartment / Luggage compartment cover

Fig. 84 Open tailgate: raised luggage compartment cover

Fig. 85 Behind the rear backrest: stowed luggage compartment cover

First read and observe the introductory information and safety warnings

When the tailgate is opened and closed, the luggage compartment cover is also raised and lowered if the straps are attached.

Light items of clothing can be stowed on the luggage compartment cover. Please ensure that the view to the rear of the vehicle is not obstructed.

Removing the luggage compartment cover

Unhook the supporting straps from the tailgate (upper arrows).

Pull the luggage compartment cover out of the side retainers towards the rear (lower arrows).

Stowing the luggage compartment cover

Turn the luggage compartment cover around until the edge with the straps is at the front.

Release the rear seat backrest and fold it forwards slightly.

Push the luggage compartment cover between the rear seat backrest and the outer wheel housing trims.

Hook the luggage compartment cover onto the side retainers and push it forwards (arrows).

Fold the rear seat backrest backwards until it engages in the catches.

Fitting the luggage compartment cover

Push the luggage compartment cover forwards into the side retainers (lower arrows).

Hook the supporting straps onto the tailgate (upper arrows).

WARNING

Objects that are not secured or are secured incorrectly, or animals on the luggage compartment cover, could cause serious injuries in any sudden driving or braking manoeuvre or accident.

Do not stow any hard, heavy or sharp items either loose or in bags on the luggage compartment cover.

Never transport pets on the luggage compartment cover.

NOTICE

To avoid damage to the luggage compartment cover:

Always ensure that the luggage compartment cover is fitted securely in the side retainers.

The luggage compartment should only be filled so that the luggage compartment cover does not push down on the load when the tailgate is closed.

Folding the seat cushion and backrests on the rear bench seat forwards and backwards

Fig. 82 Rear bench seat: folding the rear seat cushion forwards Fig. 83 Rear bench seat: release button ①, red marking ② or release button ③ First read and observe the introductory infor ...

Variable luggage compartment floor

Fig. 86 A: variable luggage compartment floor folded up and secured; B: expanding luggage compartment to front Fig. 87 C: extending the luggage compartment down; D: setting the maximum luggage s ...

Other materials:

Valve, Removing and Installing, Metal Valve
Special tools and workshop equipment required Torque Wrench -VAG1410- Perform the Following: Removing – Remove the Tire Pressure Monitoring Sensor. Refer to ...

Trailer Socket
Connect the trailer socket to the vehicle electrical system of the vehicle pulling the trailer according to the manufacturer instructions. Refer to the applicable wiring diagrams or manufacturer installation instructions when installing ...

Introduction
This chapter contains information on the following subjects: → Warning and indicator lamps → Information on steering Additional information and warnings: Starting and stopping the engine Battery Tow-starting and towing WARNING The steeri ...