Vehicle-specific weight ratings
IntroductionWiring Harness Repair Set - Hot Air Blower -VAS1978/14A
Caution
When heat-shrinking crimp connections, be careful
not to damage any other wiring, plastic parts or
insulating material with the hot nozzle of the hot air
gun.
Always ...
Wheel, Balancing with Fine Balancing Machine (Finish Balancer)
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
Round Connector Systems
Note
If necessary, housing securing mechanisms (secondary locks)
must be released or removed using specified tool before
releasing the contacts. Refer to
→ Chapter „Secondary Lock“.
...