Warning and indicator lamps
IntroductionTire Pressure Sensor and Metal Valve, Removing and Installing
Special tools and workshop equipment
required
Torque Wrench 1410 -VAG1410- and Torque Wrench 1331 5-50Nm
-VAG1331-
–
Place metal valve with rubber seal through rim from inside.
...
Battery Charger -VAS5903- Maintenance Charging
Note
If the battery is discharged by an electrical consumer
during maintenance charging, the Battery Charger -VAS5903-
automatically supplies the appropriate charge.
Maintenance charging can be performed without time ...
Flat Connector Systems
Note
If necessary, housing securing mechanisms (secondary locks)
must be released or removed using specified tool before
releasing the contacts. Refer to
→ Chapter „Secondary Lock“.
...