IntroductionFlat Spots, Correcting
Flat spots cannot be removed from tires with workshop
equipment.
Such flat spots can be "driven out" only by driving the car
until the tires are warm.
We do not recommend the following method during ...
Overview - Tire Pressure Monitoring Sensor with Valve
1 -
Tire Pressure Monitoring Sensor
Supplied complete as a service part
Removing and Installing. Refer to
→ Chapter „Tire Pressure Monitoring Sensor with Valve, Removing and
Installing“.
When battery ...
Wheel, Balancing, Tire and Wheel Radial and Lateral Run-Out, Checking
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...