Volkswagen Polo Owners Manual: After changing a wheel
First read and observe the introductory
information and safety warnings
- Clean the tools as necessary and place them back in the toolbox in the luggage compartment .
- Stow the spare wheel, temporary spare wheel or the removed wheel safely in the luggage compartment.
- The tightening torque of the wheel bolts should be checked immediately with a torque wrench .
- The damaged wheel should be replaced as soon as possible.
In vehicles with a Tyre Pressure Loss Indicator, the system may have to re-learn if new tyres are fitted .
Changing a wheel
Fig. 170 Changing the wheel:
removing the wheel bolts with the screwdriver handle
First read and observe the introductory
information and safety warnings
Removing the wheel
Read the checkli ...
Breakdown set
...
Other materials:
Introduction
This chapter contains information on the following subjects:
→ Vehicle identification data
→ Engine data
→ Dimensions
→ Performance figures
The vehicle data sticker in the service schedule or the vehicle registration
documents show which engine is installed i ...
Threaded Connections, Repairing
Special tools and workshop equipment
required
Torque Wrench 1331 5-50Nm -VAG1331-
Note
Do not use rust remover, contact spray or grease because the
lack of friction will cause the torque to be ...
Release Tool Set -VAS1978/35
The Release Tool Set -VAS1978/35- is used to release the
various primary and secondary locking mechanisms on VW-group
vehicles. The set consists of 26 different tools which can be
used to professionally release or assemble e.g. round connector
systems, f ...
