VW Polo manuals

Volkswagen Polo Service & Repair Manual: Additional Information Sources

Technical Service Handbook outlining action to be taken to rectify current problems.
For the repair manual for model-specific repair work. Refer to → Heating, Ventilation and Air Conditioning; Rep. Gr.87.
→ Wiring diagrams, Troubleshooting & Component locations
Sections of Self Study Program number 208 are no longer up-to-date. An example of this is the statement “The receiver/dryer is replaced each time the refrigerant circuit is opened”. The following prerequisites apply. Refer to → Anchor
Video programs for in-dealership training.
Special Tools and Workshop Equipment Catalog.
Service Organization Volume 1 Additional Equipment.
Repair manual Air Conditioning with Refrigerant R12. Only hardcopies of this manual are available for vehicles through MY 1993.
   
Introduction
The purpose of this Repair Manual is to provide foremen and mechanics with the basic knowledge needed to ensure expert working.   Note ...

A/C Technology Basic Principles
...

Other materials:

Rolling Resistance Tires
Tire deformation when rolling causes the vehicle to loose energy that makes the rolling resistance noticeable. Deformation is significantly lowered on rolling resistance tires due to new construction and low-wear surface mixtures. ...

After changing a wheel
First read and observe the introductory information and safety warnings Clean the tools as necessary and place them back in the toolbox in the luggage compartment . Stow the spare wheel, temporary spare wheel or the removed wheel safely in the luggage compartment. The tight ...

Taper
Taper is caused by slightly offsetting the tread and/or the belt by a few tenths of a millimeter from the geometric center of the tire. Taper cannot be recognized visually nor can it be measured with workshop equipment.     ...

© 2016-2020 Copyright www.vwpolo.net