IntroductionWorking on Airbag System
WARNING
When working on the airbag system (pyrotechnic
components, Airbag Control Module -J234-, wiring), the
ground cable must be disconnected with the ignition
switched on.
...
Repair Instructions for the Underbody and Stone Chip Protection
Note
The underbody and stone chip protection structure must be
restored back to its original layer strength and appearance
during a repair.
Water drain holes must remain free.
All threade ...
Wiring Eyelets, Repairing
Special tools and workshop equipment
required
Torque Wrench 1331 5-50Nm -VAG1331-
Note
Do not use rust remover, contact spray or grease because the
lack of friction will cause the torque to be ...