Volkswagen Polo Service & Repair Manual: Introduction
| The purpose of this Repair Manual is to provide foremen and
mechanics with the basic knowledge needed to ensure expert
working. |
 Note
| Expert knowledge is achieved by one who has taken part
successfully in instructional training e.g. AB160 or ST160,
including trained experts. |
| This Repair Manual also serves as instructional material. |
| It should also be available for presentation to the
responsible supervisory agency on request. |
Caution
| Non-approved tools or materials such as leak sealing
additives can cause damage or malfunctions in the
system. |
| Only use tools and materials approved by the
manufacturer. |
| The warranty is voided if non-approved tools or
materials are used. |
|
|
|
|
Technical Service Handbook outlining action to be taken to
rectify current problems.
For the repair manual for model-specific repair work. Refe ...
Other materials:
Towing Recognition Control Module -J345
General Information
The Towing Recognition Control Module -J345- recognizes
“trailer mode” when there is a power decrease of at least 5 W
→ Note and transmits this information to various control
modules via the CAN data bu ...
Tires, Mounting, Run-Flat Tires and Ultra High Performance Tires
Only trained personnel can perform the assembly work on
run-flat tires and ultra high performance tires.
If equipped check the tire pressure monitoring sensor with
the vehicle diagnostic tester and if necessary replace.
...
Flat Spots, Correcting
Flat spots cannot be removed from tires with workshop
equipment.
Such flat spots can be "driven out" only by driving the car
until the tires are warm.
We do not recommend the following method during ...
© 2016-2026 Copyright www.vwpolo.net
Additional Information Sources