Volkswagen Polo Owners Manual: Waxing and polishing the vehicle
First read and observe the introductory information
and safety warnings
Waxing
Waxing protects the paintwork. You will need to re-wax the vehicle with a good hard wax if water no longer clearly forms small drops and runs off the paintwork when it is clean.
Even if a wax solution is used regularly in the car wash, Volkswagen recommends protecting the paint with a coat of hard wax at least twice a year.
Polishing
Polishing is only necessary if the paint has lost its shine, and the gloss cannot be brought back by applying wax.
The car must be waxed after polishing if the polish used does not contain wax compounds to seal the paint.
NOTICE
- In order to avoid damage, painted parts with a matt finish, plastic parts, headlight lenses and the tail lights should not be treated with polish or hard wax.
- Do not polish your vehicle in a sandy or dusty environment or when the vehicle is dirty.
Cleaning and changing windscreen wiper blades
Fig. 142 Variants A and B: Changing the
windscreen wiper blades. Variants B and C: Changing the rear window wiper blade
First read and observe the introductory information
and safety warningsTh ...
Cleaning and caring for chrome and aluminium trim parts
First read and observe the introductory information
and safety warnings
Use a damp, clean, lint-free and soft cloth to clean the surfaces.
For heavy soiling use a special solvent-free cleani ...
Other materials:
Switching the front passenger front airbag on and off manually using the key-operated
switch
Fig. 58 In the stowage compartment on
the front passenger side: key switch for disabling and enabling the front airbag
on the front passenger side
First read and observe the introductory information
and safety warnings
The front passenger front airbag must be switched off when securing a
...
Washing the vehicle
First read and observe the introductory information
and safety warningsThe longer substances such as insects, bird droppings,
resinous tree sap, road dirt, industrial deposits, tar, soot or road salt and other
corrosive materials remain on the vehicle, the more damage they do to the paintwork. ...
CAN Bus Wires, Repairing
Unshielded two-strand wiring -1-
and -2- with a cross section of
0.35 mm2 or 0.5 mm2
can be used as CAN bus wiring.
The color coding of CAN bus wires can be found in the
following table:
...
