AGM Battery
Battery Safety PrecautionsWheel, Balancing with Fine Balancing Machine (Finish Balancer)
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
Wiring Eyelets, Repairing
Special tools and workshop equipment
required
Torque Wrench 1331 5-50Nm -VAG1331-
Note
Do not use rust remover, contact spray or grease because the
lack of friction will cause the torque to be ...
A/C Programmer -J127
This programmer switches the refrigerant flow direction
through the second evaporator if the temperature on the cooling
fins on the second evaporator lowers to the freezing point for
water (icing protection).
...