First read and observe the introductory information
and safety warnings
Seat belt protection
ChecklistFlat Spots, Correcting
Flat spots cannot be removed from tires with workshop
equipment.
Such flat spots can be "driven out" only by driving the car
until the tires are warm.
We do not recommend the following method during ...
Cleaning and caring for the deck stripes
First read and observe the introductory information
and safety warningsDeck stripes are a design feature and are made up of soft
polyvinyl chloride (PVC).
In the areas of the vehicle where there are deck stripes, the underlying paint
layer is protected from weather and environmental condition ...
Wheel, Balancing, Tire and Wheel Radial and Lateral Run-Out, Checking
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...