Possible Concerns
Odor from Evaporator or Heat Exchanger?Adhesive Surface Pretreatment when Replacing Laser-Soldered Roofs
Dry sand the cataphoretic primer on the roof adhesive surface
-item 6-
→ Item down to the bare metal using P180 sandpaper.
–
Dry sand the roof pillar adhesive surface
...
Test after driving for 10 minutes
First read and observe the introductory
information and safety warnings
Reconnect the tyre filler hose and check the tyre pressure on the tyre
pressure display ⑥.
1.3 bar (19 psi / 130 kPA) and lower:
Do not drive on! The tyre cannot be sealed adequately
with the breakdown set.
...
Overview - Tire Pressure Monitoring Sensor with Valve
1 -
Tire Pressure Monitoring Sensor
Supplied complete as a service part
Removing and Installing. Refer to
→ Chapter „Tire Pressure Monitoring Sensor with Valve, Removing and
Installing“.
When battery ...