Single Wire Seals, Installing
Note
Single wire seals prevent the penetration of water and dirt
into the contact housing. They are installed, for example, in
the engine compartment and must be reinstalled after a repair.
Single wire seal is crimpe ...
Coolant specification
First read and observe the introductory information
and safety warningsThe cooling system is filled at the factory with a mixture
of specially prepared water and at least 40% coolant additive G 13
(TL-VW 774 J). The coolant additive is dyed purple. This mixture of water and coolant
additive ...
Fuses in the vehicle
Fig. 172 Dash panel on the driver
side: fuse box cover
Fig. 173 In the front left of the
engine compartment: fuse box cover
First read and observe the introductory
information and safety warnings
Fuses must always be replaced by a new fuse with the same amp rating (same
colour and marki ...