This chapter contains information on the following subjects:
→ Opening and closing the electric panorama sliding/tilting glass roof
→ Electric panorama sliding/tilting glass roof – function
→ Roll-back function of the electric panorama sliding/tilting glass roof
Additional information and warnings:
WARNING
NOTICE
If there is a fault in the electric panorama sliding/tilting roof, the roll-back function will not work properly. Go to a qualified workshop
Leaves and other loose objects must be removed from the guide rails of the electric panorama sliding/tilting glass roof at regular intervals, using a vacuum cleaner or by hand.
Handling Pressure Vessels
Secure vessels to prevent them falling over!
Secure upright cylinders to stop them falling over and
cylinders lying flat to stop them rolling away.
Do not throw vessels!
If dropped, the vessels cou ...
Vibration, Road Test, Performing Before Balancing
If a vehicle comes to the workshop with the complaint
“vibration”, a road test must be performed before balancing the
wheels.
That way, information about the type of vibration can be
obtained.
Obser ...
Repair Instructions for the Underbody and Stone Chip Protection
Note
The underbody and stone chip protection structure must be
restored back to its original layer strength and appearance
during a repair.
Water drain holes must remain free.
All threade ...