Recycling and scrapping end-of-life vehicles
IntroductionValve, Removing and Installing, Valve Explanations
1. Valve Body
1 -
Valve body
2 -
Valve Insert
3 -
Valve cap
The rubber valve for tubeless tires is designed to seal
air-tight in the ...
Adhesive Surface Pretreatment when Replacing Laser-Soldered Roofs
Dry sand the cataphoretic primer on the roof adhesive surface
-item 6-
→ Item down to the bare metal using P180 sandpaper.
–
Dry sand the roof pillar adhesive surface
...
Tires, Dismounting, Wheels without and with Tire Pressure Monitoring System
If equipped check the tire pressure monitoring sensor with
the vehicle diagnostic tester and if necessary replace.
Note
When cleaning disc wheel (rim), the tire pressure monitoring
sensor (if equipped) must not come into c ...