Cleaning the engine compartment
IntroductionWheel, Balancing with Fine Balancing Machine (Finish Balancer)
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
Adhesive Surface Pretreatment when Replacing Laser-Soldered Roofs
Dry sand the cataphoretic primer on the roof adhesive surface
-item 6-
→ Item down to the bare metal using P180 sandpaper.
–
Dry sand the roof pillar adhesive surface
...
Introduction
This chapter contains information on the following subjects:
→ Fuses in the vehicle
→ Changing a blown fuse
At the time of print we are unable to provide an up-to-date overview of the
locations of the fuses for the electrical consumers. This is because the vehicle
is under co ...