First read and observe the introductory information
and safety warnings
Capacities
ChecklistWheel, Balancing on Stationary Balancing Machine
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
Threaded Connections, Repairing
Special tools and workshop equipment
required
Torque Wrench 1331 5-50Nm -VAG1331-
Note
Do not use rust remover, contact spray or grease because the
lack of friction will cause the torque to be ...
Tires, Dismounting
Remove the valve insert.
Note
If equipped handle the glued-on wheel trim carefully.
Surface slightly scratched.
Replace the damaged rim wheel trim.
...