VW Polo manuals

Volkswagen Polo Service & Repair Manual: Wiring Harness Repair Set - Hot Air Blower -VAS1978/14A

Volkswagen Polo Service & Repair Manual / Wiring / Wiring Harness and Connector Repairs / Tool Descriptions / Wiring Harness Repair Set - Hot Air Blower -VAS1978/14A

  Caution
When heat-shrinking crimp connections, be careful not to damage any other wiring, plastic parts or insulating material with the hot nozzle of the hot air gun.
Always observe operating instructions of heat gun.
The Wiring Harness Repair Set - Hot Air Blower -VAS1978/14A- is used together with the Wiring Harness Repair - Blower - Shrink Element -VAS1978/15A- to heat-shrink the crimp connectors. After crimping, crimp connections must be heat-shrunk using hot air gun to prevent moisture penetration.
 
The Wiring Harness Repair Set - Hot Air Blower -VAS1978/14A- is a component of the Wiring Harness Repair Set -VAS1978B- and its previous versions.
Crimp connectors, heat-shrinking using the Wiring Harness Repair Set - Hot Air Blower -VAS1978/14A-. Refer to or → Chapter „Wire Break with Dual Repair Point“.
 

Wiring Harness Repair Set - Hot Air Blower -VAS1978/14A

Wiring Harness Repair Set - Wire Strippers -VAS1978/3
The Wiring Harness Repair Set - Wire Strippers -VAS1978/3- is used for professional stripping and cutting of wires. The Wiring Harness Repair Set - W ...

Crimping Pliers - .35-2.5mm -VAS1978/1A
The Crimping Pliers - .35-2.5mm -VAS1978/1A- or the Wiring Harness Repair - Crimping Plier - Base Tool -VAS1978/1-2- together with the Wiring Harness Repair - Crimpin ...

Other materials:

Introduction
This chapter contains information on the following subjects:  → Locking or unlocking the driver door manually  → Locking the front passenger door and rear doors manually  → Unlocking the tailgate manually  → Unlocking the selector lever lock manually If the vehic ...

Pressure and Boiling Point
The boiling point given in tables for a liquid is always referenced to an atmospheric pressure of 1 bar (14.5 psi). If the pressure acting on a fluid changes, its boiling point also changes. For example, water boils at a lower temperatur ...

Diagonal Washouts
Diagonal wear spots on tires Diagonal wear spots run at an angle of approximately 45° with respect to the plane of circumference. They usually occur once, but may also occur several times along the tire circumference. ...

© 2016-2021 Copyright www.vwpolo.net