Volkswagen Polo Owners Manual: Belt height adjuster
Fig. 54 Next to the front seats: belt height adjuster
First read and observe the introductory information
and safety warnings
The seat belt height adjusters for the front seats can be used to adjust the position of the seat belt on the shoulder so that it can be fastened properly:
- Push the shoulder belt guide together in the direction of the arrows and hold .
- Push the shoulder belt guide up or down so that the seat belt lies over the middle of the shoulder .
- Let go of the shoulder belt guide.
- Pull sharply on the seat belt to check whether the shoulder belt guide is engaged securely.
WARNING
Seat belt routing
Fig. 52 Correct seat belt routing and
head restraint adjustment
Fig. 53 Correct seat belt routing during
pregnancy
First read and observe the introductory information
and safety warnings
Se ...
Automatic belt
retractor, belt tensioner, belt tension limiter
First read and observe the introductory information
and safety warnings
The seat belts in the vehicle are part of the vehicle safety concept and include
the following important functions:
Autom ...
Other materials:
4-Pin Heated Oxygen Sensor (HO2S), Removing and Installing
Note
Do not repair the heated oxygen sensor wires. Repairing may
result in malfunctions.
Use the faulty sensor as a guide for installing all of the
accompanying attachments, cable ties or marking bands.
...
One-Part Clean Spray Can -LLS MAX 099-, -LLS MAX 100-, Aquaplus System
Definition:
One-Part Clean Spray Can -LLS MAX 099-, 250 ml for
Water-Based Mixed Paint “Aquaplus System”
One-Part Clean Spray Can -LLS MAX 100-, 400 ml for
Water-Based Mixed Paint “Aquaplus System”
...
Taper
Taper is caused by slightly offsetting the tread and/or the
belt by a few tenths of a millimeter from the geometric center
of the tire. Taper cannot be recognized visually nor can it be
measured with workshop equipment.
...
