VW Polo manuals

Volkswagen Polo Service & Repair Manual: Battery Post/Terminal

  WARNING
Risk of injury. Follow all Warnings and Safety Precautions. Refer to → Chapter „Warnings and Safety Precautions“.
  Caution
In order to prevent damage to the battery terminals and battery posts, observe the following
Never use force to attach the battery terminals by hand.
Do not apply grease to battery posts.
The battery terminal clamps should be mounted so that the battery terminal sits flush with the clamp or protrudes out of it.
After tightening the battery terminal clamps to the specified torque, the threaded connections must not be tightened again.
Working on Airbag System
  WARNING When working on the airbag system (pyrotechnic components, Airbag Control Module -J234-, wiring), the grou ...

Battery, Checking
General Information   WARNING Risk of injury. Follow all Warnings and Safety Precautions. Refer to → Cha ...

Other materials:

MFD (multifunction display) menu
First read and observe the introductory information and safety warnings The multifunction display (MFD) is equipped with two automatic memories: 1 - Trip memory and 2 - Total journey memory. The number of the current memory on display will be shown in the upper right-hand corner of the displ ...

Siemens Wheel Electronics Tire Pressure Monitoring Sensor, Removing and Installing
  WARNING If tire sealant was used, then the wheel electronics on that particular wheel must be replaced. The Siemens wheel electronics does not have a microencapsulated ...

Single Wire Seal Assembly Tools
Assembly tools serve the purpose of allowing the single wire seals to be slid without damage into terminal housing up to stop, this achieves a complete seal between single wire and terminal housing. Four assembly tools for single wire se ...

© 2016-2026 Copyright www.vwpolo.net