Battery General InformationWires with Cross Section up to 0.35 mm 2,
Repairing
Special tools and workshop equipment
required
Crimping Pliers - .35-2.5mm -VAS1978/1A-
Wiring Harness Repair - Crimping Head - .35-2.5mm
-VAS1978/1-1-
When repairing wires with a cross- ...
Changing a blown fuse
Fig. 174 A blown fuse
Fig. 175 Removing or fitting a
fuse using the plastic pliers ①
First read and observe the introductory
information and safety warnings
Preparation
Switch off the ignition, the lights and all electrical consumers.
Open the appropriate fuse box .
Detecti ...
Valve, Removing and Installing, Valve Explanations
1. Valve Body
1 -
Valve body
2 -
Valve Insert
3 -
Valve cap
The rubber valve for tubeless tires is designed to seal
air-tight in the ...