Round Connector Systems
Note
If necessary, housing securing mechanisms (secondary locks)
must be released or removed using specified tool before
releasing the contacts. Refer to
→ Chapter „Secondary Lock“.
...
Corrective Action When Vehicle Pulls to One Side
Test Conditions Before and During the Road Test
–
Check all suspension components on front and rear axle for
damage.
–
Check tire pressure and correct if necessary.
– ...
Indicator lamps
First read and observe the introductory information
and safety warnings
Lit up
Possible cause
Solution
Engine management system fault (Electronic Power Control).
The engine should be checked by a qualified workshop
as s ...