Hill Hold Assist
IntroductionWorking on Airbag System
WARNING
When working on the airbag system (pyrotechnic
components, Airbag Control Module -J234-, wiring), the
ground cable must be disconnected with the ignition
switched on.
...
Flat Spots, Correcting
Flat spots cannot be removed from tires with workshop
equipment.
Such flat spots can be "driven out" only by driving the car
until the tires are warm.
We do not recommend the following method during ...
Checklist
Never carry out any work on the engine or in the engine compartment
if you are not familiar with the requisite procedures and general safety requirements,
or if you only have access to incorrect operating equipment, service fluids,
and unsuitable tools . The work should be carried ou ...