
Fig. 152 In the upper part of the centre console: button for switching the hazard warning lights on and off
First read and observe the introductory
information and safety warnings
Observe any legislation concerning the safety of broken-down vehicles. For example, many countries stipulate that you have to switch on the hazard warning lights and wear a high-visibility waistcoat.
Introduction
ChecklistTire Pressure Sensor and Metal Valve, Removing and Installing
Special tools and workshop equipment
required
Torque Wrench 1410 -VAG1410- and Torque Wrench 1331 5-50Nm
-VAG1331-
–
Place metal valve with rubber seal through rim from inside.
...
Trailer Socket
Connect the trailer socket to the vehicle electrical system
of the vehicle pulling the trailer according to the manufacturer
instructions.
Refer to the applicable wiring diagrams or manufacturer
installation instructions when installing ...
Threaded Connections, Repairing
Special tools and workshop equipment
required
Torque Wrench 1331 5-50Nm -VAG1331-
Note
Do not use rust remover, contact spray or grease because the
lack of friction will cause the torque to be ...