VW Polo manuals

Volkswagen Polo Service & Repair Manual: Evaporator Vent Temperature Sensor -G263- or Evaporator Temperature Sensor -G308

Function:
The Evaporator Vent Temperature Sensor -G263- or Evaporator Temperature Sensor -G308- determines the temperature behind the evaporator. This value goes to the air conditioning control module and serves as a reference signal for regulating the A/C compressor. This prevents the evaporator from icing up.
 

Evaporator Vent Temperature Sensor -G263- or Evaporator Temperature Sensor -G308

A/C Evaporator Temperature Switch -E33
Function: The A/C Evaporator Temperature Switch -E33- determines the temperature between the evaporator cooling fans. It prevents the possibili ...

Refrigerant Circuit Pressures and Temperatures
  WARNING When performing work on refrigerant circuit, observe all generally applicable safety precautions and pressure ...

Other materials:

Decorative Trims, Replacing, Bonded Decorative Trims
Special tools and workshop equipment required Cartridge Gun -VAG1628- Trim Removal Wedge -3409- Wiring Harness Repair Set - Hot Air Blower -VAS1978/14A- Materials ...

Flushing Not Necessary
  Note For vehicles with an electrically-driven A/C compressor, de-energize the high voltage system before removing the A/C compressor. Refer to → Electrical System Hybrid; Rep. Gr.93. –  Dischar ...

Securing child seats with the top tether
Fig. 65 Retaining ring for top tether in the stowage area behind the rear seats Fig. 66 Top tether hooked over into the luggage compartment First read and observe the introductory information and safety warnings Observe the child seat manufacturer's instructions when fitting or removin ...

© 2016-2024 Copyright www.vwpolo.net