Volkswagen Polo Service & Repair Manual: 12 V Socket

Volkswagen Polo Service & Repair Manual / Interior Lights, Switches / 12 V Socket

12 V Socket , Removing and Installing

Caution

Using force to remove cigarette lighter sockets without illumination can result in damage to the mounting sleeve retainers.

The Cigarette Lighter Release Tool -T40148- can only be used to remove cigarette lighter sockets with illumination.

The puller is not capable of releasing the retainers on power sockets without illumination.

Sockets without illumination usually cannot be removed without damage.

Cigarette Lighter -U1-, removing and installing. Refer to → Chapter „Cigarette Lighter -U1-“.

Socket Illumination Bulb -L42-, Removing and Installing

The Socket Illumination Bulb -L42- is removed in the same manner as the Cigarette Lighter Illumination Bulb -L28-. Refer to → Chapter „Cigarette Lighter Illumination Bulb -L28-, Removing and Installing“.

Interior Lights, Switches

...

Cigarette Lighter -U1-

...

Other materials:

Positive and earth jump lead connection points
Fig. 190 In the engine compartment: jump lead connection point, positive ⊕ First read and observe the introductory information and safety warnings The positive jump lead connection point is in the engine compartment. In order to establish a suitable earth connection, screw towing eye into ...

Indicator lamp
First read and observe the introductory information and safety warnings Lit up Possible cause Solution Windscreen washer fluid level too low. Fill up the washer fluid reservoir as soon as possible . Several warning and indicator la ...

Checklist
Carry out the steps in the specified order : With the engine at operating temperature, park the vehicle on a level surface to ensure that the engine oil reading is correct. Switch off the engine and wait a few minutes for the engine oil to flow back into the sump. Open the ...