Volkswagen Polo Service & Repair Manual: Wiring Harness Repair Set -VAS1978A

Volkswagen Polo Service & Repair Manual / Wiring / Wiring Harness and Connector Repairs / Wiring Harness Repair Set / Wiring Harness Repair Set -VAS1978A

The new Wiring Harness Repair Set -VAS1978A- makes optimal repair quality possible in the realm of vehicle electronics. Using the new pliers, repairs affecting harness connectors and for breaks in wiring can be performed. For this purpose, complete repair wires with terminals already crimped on are used and can be connected to vehicle-specific wiring harness by the use of the four different types of crimp connections. A pair of new crimping pliers with crimping heads and a hot air gun for shrinking the crimp connections provide trouble-free electrical connection.

Note

Additional information:

Refer to Wiring Harness Repair Set -VAS1978A- Operating Instructions.

Wiring Harness Repair Set -VAS1978A

Upgrade Kit For VAS1978 -VAS1978/50

The Upgrade Kit For VAS1978 -VAS1978/50- is required in order to bring the “old”Wiring Harness Repair Set -VAS1978- up to the new standard of the Wiring Harness R ...

Release Tool Set -VAS1978/35

The Release Tool Set -VAS1978/35- is used to release the various primary and secondary locking mechanisms on VW-group vehicles. The set consists of 26 different tools ...

Other materials:

Legal Requirements
The manufacturer is granted general type approval for the whole vehicle including all parts and for specific retrofitting (general type approval according to § 20 StVZO (Motor Vehicle Construction and Use Regulations or EU type approval). ...

Wheel, Balancing with Fine Balancing Machine (Finish Balancer)
Before beginning balancing, the following requirements must be fulfilled. The tire pressure must be OK. The tire profile must not be worn on one side. The tire profile must be at least 4 mm. ...

Cigarette Lighter Socket, Removing and Installing
Special tools and workshop equipment required Cigarette Lighter Release Tool -T40148- Note The removal and installation for all sockets is performed in the same way and is only described for the ciga ...