Volkswagen Polo Service & Repair Manual: Tire Sealant, Removing
Place the wheel on a flat surface. |
– |
Remove the valve insert. |
Caution
Tire sealant is harmful to health. |
eye and skin irritation as well as allergies are
possible. |
|
|
|
|
– |
Using a drill or cutting bit, carefully drill a hole in the
tire shoulder area. |
– |
Hold the wheel over a drip tray and let the sealant flow
out. |
– |
Remove the tire from the rim. |
|
|
|
Remove the valve insert.
Note
If equipped handle the glued-on wheel trim carefully.
Surface slightly scratched.
...
Other materials:
Run-Flat Tire, Structure and Identification, SST Tire
Run-Flat Tires, Dismounting and Mounting. Refer to
→ Chapter „Tires, Mounting“.
A Tire Pressure Monitoring Display is Necessary When Using
Run-Flat Tires.
Tire Damage and the Pressure Loss Resulting From it ...
Run-Flat Tire, Retrofitting/Conditions for use of Run-Flat Tires
Caution
Using run-flat tires on vehicles is permitted only
if the run-flat tire is supplied with the vehicle either
as standard equipment or as an option.
Because pressure ...
Checking the coolant level and refilling coolant
Fig. 139 In the engine compartment: mark
on the coolant expansion tank
Fig. 140 In the engine compartment: coolant
expansion tank cap
First read and observe the introductory information
and safety warningsThe warning lamp for the engine coolant will light up
if the engine coolant level i ...
© 2016-2021 Copyright www.vwpolo.net