VW Polo manuals

Volkswagen Polo Owners Manual: Preparations for changing a wheel

Volkswagen Polo Owners Manual / Changing a wheel / Preparations for changing a wheel

First read and observe the introductory information and safety warnings

Introduction
This chapter contains information on the following subjects:  → Preparations for changing a wheel  → Wheel bolts  → Lifting the vehicle with the jack  → Changing a w ...

Checklist
The following actions must always be carried out in the given order in preparation for changing the wheel : In the event of a flat tyre, park your vehicle on a firm and level surface at a s ...

Other materials:

Information on the brakes
First read and observe the introductory information and safety warnings New brake pads cannot generate the full braking effect during the first 200 to 300 km and must first be run in  . However, you can compensate for the slightly reduced braking force by applying more pressure to the bra ...

Turn signal and main beam lever
Fig. 67 Turn signal and main beam lever First read and observe the introductory information and safety warnings Move the turn signal and main beam lever to the desired position: Right turn signal . When the ignition is switched off, right parking light . Left turn signal . When the ...

Test after driving for 10 minutes
First read and observe the introductory information and safety warnings Reconnect the tyre filler hose and check the tyre pressure on the tyre pressure display ⑥. 1.3 bar (19 psi / 130 kPA) and lower: Do not drive on! The tyre cannot be sealed adequately with the breakdown set. ...

© 2016-2021 Copyright www.vwpolo.net