Volkswagen Polo Service & Repair Manual: Pneumatic Brush Grinder Set -VAS6446
| Pneumatic Brush Grinder Set -VAS6446- |
| The Pneumatic Brush Grinder Set -VAS6446- serves to prepare
the surface. |
| For example: removes underbody protection, sealant, and
other adhesive materials. Removes corrosion and strips paint in
the vehicle body area. Deep cleaning and has a sand-blasting
effect; protects the material and has a material compressing
effect. Low RPM. |
| 1 pneumatic brush grinder set |
| 1 bracket for brush grinder strap 23/28mm |
| 1 bracket for brush grinder strap 11/28mm |
| 1 brush grinder strap 23/28 mm |
| 2 brush grinder straps 11/28 mm |
| 3 special brush grinder straps 11/28/17 mm |
|
|
|
Definition:
Stone Chip Tester -VAS5102A-
Product Description
The Stone Chip Tester -VAS5102A- is a prop ...
Definition:
Brush Grinder Set -VAS6776-
Product Description:
The device is used to clean surfaces and r ...
Other materials:
Checklist
The following actions must always be carried out in the given
order in preparation for changing the wheel :
In the event of a flat tyre, park
your vehicle on a firm and level surface at a safe distance from the flow of
traffic.
Apply the handbrake firmly Braking,
stopping an ...
Checking the coolant level and refilling coolant
Fig. 139 In the engine compartment: mark
on the coolant expansion tank
Fig. 140 In the engine compartment: coolant
expansion tank cap
First read and observe the introductory information
and safety warningsThe warning lamp for the engine coolant will light up
if the engine coolant level i ...
Wheel, Balancing with Fine Balancing Machine (Finish Balancer)
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
© 2016-2026 Copyright www.vwpolo.net
